EtherWAN
      Issue Date: 2010/02/24  
 

 
NEW Ethernet Extender reaches much farther...
NEW Ethernet Extender reaches much farther...  
If you already impressed by EtherWAN´s existing Ethernet Extenders, here is another one to keep the heat on. The new ED3011 is a point-to-point Ethernet Extender that efficiently extends 10/100 Ethernet up to 6.2km using existing straight 2-pair copper wire. The ED3011 will allow Ethernet connectivity in existing facilities without pulling extra cable. This is the perfect solution for factory floors running serial signals over Ethernet or commercial buildings where it´s not practical to pull new cables. The new ED3011 is designed for longer distance applications. The ED3011 rounds out Etherwan´s Ethernet extender line consisting of; ED3101/ED3141/ED3331/ED3341, all of which extend Ethernet hundreds of meters using existing infrastructure of copper pairs or coaxial cable.
         
  ED3011 Series
Managed SHDSL Ethernet Extender
 
  Operates transparent to higher layer protocols such as TCP/IP  
ED3011 Series
  Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
  Ethernet Extender (RJ-48) Port: Symmetrical on the SHDSL
  Fixed Data Rate Selection from 192Kbps to 10752Kbps for two pairs copper wire
  Adaptive Multi Rate from 192Kbps to 4608 Kbps for 1-Pair SHDSL
  Adaptive Multi Rate from 384Kbps to 9216 Kbps for 2-Pair SHDSL
  Maximum Distance: 6.8 kilometers
     
     
   
  ED3341 Series
Hardened 10/100BASE-TX Ethernet Extender Over Coaxial Cable
 
  Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment  
ED3341 Series
  Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
  Ethernet Port: 10/100Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
  Ethernet Extender Port: Symmetrical on the VDSL, High-speed full-duplex up to 85 Mbps communications link over existing coaxial cable
  Ten speeds with speed indicator LEDs on front panel of unit,
Up to 85Mbps@about 200meters (656ft.)
Down to 1Mbps@about 2,600meters (8,530ft.)
  -40°C to 75°C (-40°F to 167°F) operating temperature range
  Redundant power inputs with Terminal Block and DC Jack
  DIP switch to select Local or Remote side
  Hardened aluminum case
  Supports DIN-Rail, Panel, or Rack Mounting installation
   
  ED3331 Series
Industrial 10/100BASE-TX Ethernet Extender Over Coaxial Cable
 
  Operates transparent to higher layer protocols  
ED3331 Series
  Ethernet Port: 10/100Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
  Ethernet Extender Port: Symmetrical on the VDSL, High-speed full-duplex up to 85Mbps communications link over existing coaxial cable
  Supports DIP switch to select Local or Remote side
  Ten reference speeds supports,
Up to 85 Mbps@about 200 meters (656ft.),
Down to 1 Mbps@about 2600 meters (8,530ft.)
  -10°C to 60°C (14°F to 140°F) operating temperature range
  Hardened aluminum case
  Supports DIN-Rail, Wall Mounting installation
  Compatible with EMC1600 Media Converter Chassis
ED3331 Series ED3341 Series
   
   
   
Intelligent Transportation Systems Renewable Energy Building Automation
     
Water Treatment Ethernet Extenders for Metro Surveillance Weather Observation
   
   
Date

Exhibition

Location

Booth Number
03/02 - 03/06 CeBIT Hannover, Germany Hall 13, E69
03/23 - 03/25 Distributech Tampa FL 145
03/24 - 03/26 ISC West Las Vegas, NV 4059
     
EX72000 Download EX72000 Overview
 
Product News Applications Events Contact us EtherWAN EtherWAN ED3011 Series